Icon  | MJB Heating and CoolingFire Frame  | MJB Heating and Cooling
Snow Icon  | MJB Heating and Cooling
Design | MJB Heating and Cooling
Design | MJB Heating and Cooling
HomeRight Arrow | MJB Heating and CoolingBlogRight Arrow | MJB Heating and Cooling
Preventing Ice Damage to Outdoor Units: Why Snow Legs Are Essential
Design | MJB Heating and Cooling

Preventing Ice Damage to Outdoor Units: Why Snow Legs Are Essential

Design  | MJB Heating and Cooling
Published On:
Preventing Ice Damage to Outdoor Units: Why Snow Legs Are EssentialDesign | MJB Heating and Cooling

Preparing Your Heating System for Winter Storms

At MJB Heating & Cooling, we know that with November pre-winter prep fully underway, preventing ice damage to outdoor units is the most critical step you can take before the first major freeze hits our Derby community. The transition from autumn to winter brings a rapid drop in temperatures, and your heating system needs to be ready to handle the shift. While modern outdoor units are built to withstand severe weather, our team routinely sees how ice storms pose a unique and catastrophic threat to delicate internal components. If your equipment sits directly on a concrete pad, it is highly vulnerable to freezing rain, heavy snowfall, and pooling water.

When you need comprehensive HVAC services, establishing a preventative maintenance plan is the best way to safeguard your equipment. Proper elevation and drainage are the absolute keys to winter survival for any outdoor heating system. Without a clear path for water to escape, even the most advanced systems will eventually succumb to ice accumulation.

The Core Strategy for Preventing Ice Damage to Outdoor Units

Protecting your system requires understanding how it interacts with the winter environment. Throughout the colder months, your equipment is constantly pulling moisture out of the freezing air. This moisture naturally condenses and freezes on the metal surfaces of your system. Your unit is designed to handle this through an automatic melting process, but as we frequently explain to our customers, that process completely fails if the melted water has nowhere to go.

Key areas to address during November pre-winter prep include:

• Clearance: Ensuring there is adequate space beneath the unit for water to flow away.

• Airflow: Keeping the sides and top of the unit free from drifting snow and debris.

• Drainage paths: Verifying that the surrounding ground slopes away from the concrete pad to prevent pooling.

By focusing on these foundational elements before the severe weather arrives, you ensure your home stays warm and your equipment remains safe from crushing ice damage.

How Freezing Rain and Ice Storms Threaten Air-Source Heat Pumps

In our years of servicing local heat pumps, we've found that to fully protect your system, it helps to understand exactly what you are protecting it from. Not all winter precipitation affects your equipment in the same way. There is a massive difference between light, dry snow and the severe freezing rain that frequently batters the Midwest.

Air-source heat pumps are particularly vulnerable to these conditions because they operate continuously through the winter. Unlike a traditional air conditioner that sits dormant for months, air-source heat pumps actively extract ambient heat from the freezing outdoor air and transfer it inside your home. Because the refrigerant coils get extremely cold during this process, they act as a magnet for airborne moisture.

The Midwest Climate Challenge

Here in Derby and the surrounding Kansas region, our technicians at MJB Heating & Cooling frequently see winter storms bring a mix of freezing rain and heavy sleet. This type of precipitation is far more dangerous to your system than standard snowfall. Freezing rain coats the metal grilles, fan blades, and internal coils in a solid, impenetrable layer of ice. When a unit sits flat on a concrete pad, snowdrifts can quickly bury the base, restricting the vital airflow the system needs to function.

• Dry, Powdery Snow — Impact on Air-Source Heat Pumps: Easily blows through or brushes off the outer grilles. Does not adhere strongly to metal. — System Risk Level: Low to Moderate (unless drifting buries the unit)

• Heavy, Wet Snow — Impact on Air-Source Heat Pumps: Clings to the cabinet and can block horizontal airflow. Melts slowly into the base of the unit. — System Risk Level: Moderate to High

• Freezing Rain / Sleet — Impact on Air-Source Heat Pumps: Instantly flash-freezes upon contact with cold metal. Encases the coils and fan assembly in solid ice. — System Risk Level: Severe

When freezing rain strikes, the ice accumulation happens rapidly. The unit is forced to work twice as hard to pull air through the restricted, ice-covered grilles, driving up your energy consumption and putting immense strain on the compressor.

The Hidden Danger of the Defrost Cycle Without Proper Drainage

The problem: As air-source heat pumps run in cold weather, a layer of white frost naturally builds up on the outdoor coils. To clear this frost, the system automatically enters a "defrost cycle." It temporarily reverses its operation, sending warm refrigerant back outside to heat up the coils and melt the frost away.

The cause of failure: The mechanical flaw occurs when the unit sits entirely flat on its concrete pad. The defrost cycle successfully melts the frost into liquid water, but that meltwater instantly drops to the base of the unit. Because the base is sitting flat against freezing concrete, the water has zero clearance to drain away.

The compounding solution: Within minutes, the freezing ambient air turns that trapped puddle of meltwater into a solid block of ice right at the bottom of your equipment. The next time the defrost cycle runs, more water drips down on top of that ice block, freezing again. Layer by layer, the ice grows upward from the base, eventually engulfing the entire lower half of the cabinet in solid ice. A pattern we see often is that the only way to break this destructive cycle is to elevate the unit, providing a continuous, open gap for the water to escape before it can refreeze.

How Snow Legs Protect Your Heat Pump's Defrost Cycle
How Snow Legs Protect Your Heat Pump's Defrost Cycle

The Catastrophic Cost of Fan Blade Strikes

When the defrost cycle fails to drain properly and ice begins growing upward from the base of the unit, it creates a ticking time bomb for your system's most critical moving parts. The outdoor fan assembly is designed to spin at high speeds, pulling massive volumes of air through the side coils and exhausting it out the top.

As the solid block of ice climbs higher inside the cabinet, it eventually reaches the path of these spinning fan blades.

What Happens During an Ice Strike?

The moment a high-speed metal or composite fan blade strikes a solid block of ice, the mechanical damage is instantaneous and severe.

• Shattered blades: Composite fan blades will often crack or shatter completely upon impact, sending sharp debris flying through the delicate surrounding coils.

• Bent fan assemblies: Metal blades may bend out of alignment. Even a slight bend throws the entire fan off balance, causing violent vibrations that can tear the motor mounts apart.

• Motor burnout: If the ice is thick enough, it will stop the blades from turning entirely. The fan motor will continue trying to spin against the immovable ice, rapidly overheating and burning out the electrical windings.

When our team responds to this type of catastrophic mechanical failure, we usually find that the system's internal safety sensors have shut the entire unit down to prevent further destruction. This triggers system lockouts and flashing error codes, leaving your home completely without heat in the middle of a freezing storm. If your system has shut down due to ice, understanding heat pump error codes can help you communicate the exact issue to your technician.

What Are Snow Legs and How Do They Protect Your Equipment?

Based on our experience protecting Derby homes, the most effective way to prevent ice buildup and protect your fan blades is to address the drainage problem at its source. This is exactly what snow legs are designed to do. Snow legs, also known as equipment risers or stand-offs, are specialized, heavy-duty supports installed directly beneath the four corners of your outdoor unit.

The Mechanics of Elevation

Snow legs physically lift the entire cabinet off the concrete pad, usually elevating it anywhere from 3 to 6 inches, depending on the specific model and local requirements. This elevation serves two crucial purposes:

1. Clearing the Snow Line: By raising the unit above the average snowfall line, snow legs prevent light to moderate snowdrifts from suffocating the lower intake grilles. This ensures the system can always pull in the air it needs to operate efficiently.

2. Facilitating Complete Drainage: Most importantly, snow legs create a wide, open air gap between the bottom of the unit and the freezing concrete pad.

When the system enters its defrost cycle and melts the frost off the coils, the resulting water drops straight down through the bottom of the cabinet. Because of the snow legs, the water falls completely clear of the internal components. It hits the concrete pad below and drains away harmlessly, rather than pooling inside the cabinet and refreezing into a destructive block of ice.

Why Professional Elevation is Required Before Winter Arrives

Upgrading your system with snow legs is one of the smartest investments you can make during your November pre-winter prep, but we cannot stress enough that it is absolutely not a do-it-yourself project. Properly elevating an outdoor unit requires heavy lifting, precise leveling, and careful management of highly pressurized refrigerant lines.

The Dangers of DIY Elevation

Our technicians have responded to countless emergency calls where homeowners attempted to prop their units up on cinder blocks, bricks, or scrap wood. These DIY methods are incredibly dangerous for your equipment.

• Fractured refrigerant lines: Lifting the unit unevenly or without proper support can stretch, kink, or completely snap the copper refrigerant lines connected to your home. This results in a total loss of refrigerant and a massive repair bill.

• Vibration and settling: Cinder blocks and bricks are not designed to absorb the intense vibrations of a running compressor. Over time, they can crack, causing the unit to tip and suffer catastrophic internal damage.

• Voided warranties: Modifying the installation of your equipment without a licensed professional will almost always void your manufacturer's warranty.

The quick fix: Instead of risking your system, rely on local Midwest HVAC experts like our team at MJB Heating & Cooling, who understand exactly how Kansas ice storms impact systems. We offer real-world preventative solutions like proper, structurally sound snow legs rather than generic manufacturer advice. If you suspect your unit has already suffered damage from settling or improper elevation, scheduling heat pump repair in Derby before the next storm hits is essential.

Securing Heating Reliability Across the Region

Protecting the outdoor unit is the absolute best way to ensure your indoor comfort remains uninterrupted during severe winter weather. When your equipment is properly elevated and can drain freely, you eliminate the biggest threat to its mechanical survival.

Proactive winterization helps homeowners across the region avoid the stress, discomfort, and expense of a mid-storm emergency breakdown. Whether you are dealing with early November frost or a deep January freeze, knowing your system is physically prepared brings incredible peace of mind. For homeowners throughout Derby and surrounding service areas, scheduling a professional assessment of your outdoor unit's elevation and drainage with our team is a vital part of seasonal home maintenance.

Frequently Asked Questions

Why does my heat pump freeze up in the winter?
Your heat pump freezes up because it actively extracts heat from the cold outdoor air, causing condensation to form and freeze on the cold refrigerant coils. A light layer of white frost is a completely normal part of winter operation. However, if the entire unit is encased in a thick, solid block of ice, it usually means the defrost cycle is failing to drain properly.

What are snow legs for a heat pump?
Snow legs are specialized, heavy-duty risers installed under the four corners of your outdoor unit. They elevate the equipment several inches off the ground. This elevation allows melted water from the defrost cycle to drain completely away from the unit before it can refreeze at the base.

How do I protect my heat pump from freezing rain?
The best protection from freezing rain is ensuring the unit is elevated on snow legs and has completely unobstructed airflow. You should also check that your home's gutters are not leaking or dripping water directly onto the unit. Proper drainage prevents the freezing rain from compounding into a solid block of ice inside the cabinet.

Should I cover my heat pump in the winter?
No, you should never cover an air-source heat pump during the winter. These systems run continuously to heat your home and require massive amounts of unobstructed airflow to function. Covering the unit will choke off the air supply, trap destructive moisture inside the cabinet, and cause rapid mechanical failure.

Can I manually chip ice off my outdoor unit?
You should never manually chip or hack at the ice on your outdoor unit with a tool. The internal aluminum fins and copper refrigerant coils are highly delicate and easily punctured by scrapers, screwdrivers, or shovels. If your unit is heavily encased in ice, switch your thermostat to emergency heat and call a licensed professional like our team at MJB Heating & Cooling.

Does my air-source heat pump need to be elevated on a stand?
Yes, if you live in a climate that experiences freezing temperatures, snow, or ice storms, elevation is essential. Elevating the unit on a stand or snow legs is the only reliable way to ensure the water generated during the defrost cycle can escape the cabinet safely.

Take Action Before the Freeze

Do not wait for the first major ice storm to find out your system cannot drain properly. Protecting your equipment with professional snow leg installation is a critical part of November pre-winter prep. Schedule your preventative maintenance with MJB Heating & Cooling today to ensure your heating system is elevated, secure, and ready to keep your family warm all season long.

Customer Testimonials

Star Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and Cooling

Our A/C stopped working on a Sunday and due to health issues, we needed to find a service company available on a Sunday. I called MJB and left a message on their emergency voice mail. Within 10 minutes Tom Buck called me to hear my description of the symptoms. He was just finishing an appointment in Wichita and would be on his way to my home on the south end of Derby. He arrived within 30 minutes! From start to finish he was the perfect example of what you could ever hope for in an HVAC tech and a human being. His evaluation of our system inside and out was as thorough as I could ever imagine and once he was done with the repair, our system is running as well or better than ever. Well worth the price for the evaluation, parts, and labor. Thank you again Tom for an awesome experience.

Scott W
Star Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and Cooling

Our AC went out during the hottest days of the year, and they were out next day! We have been jerked around by a shoddy home warranty for years. We finally had a chance to pick our own repair people, and MJB came highly recommended. I can see why! I was impressed with the honesty and speed at which they fixed our AC unit!

Alicia T
Star Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and Cooling

Our commercial building had a lightening/electrical strike and damaged our 20 ton AC unit. No one could find us a new unit before the end of September. Imagining going all of August and September with no AC in Kansas and working inside near 100 degree temps is less than thrilling. Dale and the team at MJB called around and saved the day. They had us a new unit 5 weeks earlier than other could promise and I now have happy employees. The unit is amazingly quiet, super cold and so much more energy efficient. Thank you for being our super hero!

Ben H
Star Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and Cooling

Came out and installed my new furnace. Was very polite and affordable. They are very acknowledgeable and I highly recommend!

Diana D
Star Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and Cooling

Thank you very much. We had our 1st warm night in 3weeks. MJB took the time and effort to find the real problem. And the employees were kind and thoughtful and explained things very well. I cannot thank you and all of MJB. Will recommend you highly. Thanks again Marjorie Herman Oxford Kansas

Marjorie H
Star Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and CoolingStar Icon | MJB Heating and Cooling

We had a new system installed and I was so impressed with how quick they were in come out and install it, in the middle of a hot summer day. They were so friendly & very professional. I had a small problem with a weird sound and they came over immediately and fixed it. Love them!

Yvette A